Loading...
Design Installation2019-01-31T18:52:35+00:00

Please note – Harmonised Standards verify compliance and define the requirements for a product based on the intended function. The requirements for compliance have been developed and set by CEN/CENILEC within EU Legislation. They are designed to remove barriers to trade, promote entreprenuership and improve access to markets.

Compliance

Duradrain & Durachannel are produced to a harmonised standard (EN1433), carry the CE mark and therefore they can, and should be approved for use subject to meeting the minimum stipulated requirements within the standard and any interim revision in force.

For any project with additional approval criteria/qualification beyond the minimum requirements as stipulated above, on receipt of information, we can advise as to the suitability and performance of products within a specific design.

It is important for designers to understand that the CE mark verifies product compliance however the actual load performance and longevity of a product/system is not limited to the strength of the individual unit. Correct design and installation will enhance performance and ensure best integration across a project providing longevity of system.

Additionally, any hydraulic or secondary function needs to be specifically compared and checked against a project’s overall design and drainage strategy.

Our Installation guide provides advice and data to help ensure a best and optimum solution is realised for your project.

 

Recent Posts

The Durakerb range conforms to BS-EN1340 – Ref MCHW – Series 1100. Products are also BBA/HAPAS Certified, Doc – 08/H133 (1st Issue 2008). There are over 400,000 Durakerb units installed in the UK and Ireland in Highways, Car Parks, Schools, Retail and Industrial Developments.

Duradrain is fully compliant and CE marked (Heavy Duty Load Category D400) to BS-EN1433 – Ref MCHW – Series 500. EN1433 is a European Harmonised Standard for which the CE Mark is the only mark for compliance. Duradrain also meets the requirements of the latest interim revision – IAN117/08 Rev 2 and is there suitable for use and adoption for Highways in the UK, Ireland and Mainland Europe.

Durachannel is fully compliant and CE marked (Heavy Duty Load Category D400) to BS-EN1433 – Ref MCHW – Series 500. EN1433 is a European Harmonised Standard for which the CE Mark is the only mark for compliance. Durachannel also meets the requirements of the latest interim revision – IAN117/08 Rev 2 and is there suitable for use and adoption for Highways in the UK, Ireland and Mainland Europe.

Would You Like A Sample Of DuraKerb?

If you would like a sample of DuraKerb, please let us know, we will happy to drop it off for you.

Contact Us Today For Your Sample